Discussion:
Connecting an ipod to a philips radio?
(too old to reply)
El Badgerino
2006-04-04 12:14:34 UTC
Permalink
Watcha, I've just bought a new car with a philips radio pretty much
well integrated into the dash. I'm trying to find the best way to
connect an ipod up to the radio.

So far I have:-

* Using a tape adapter
* Using an itrip or similar
* Connecting it to the stereo's cd changer port using an aux-in adapter
* Connecting it to the aerial port using an adapter (you can then
switch between ipod and radio)

My prefered option would be the aux in way, the only issue I have is
that no-one seems to do a cheap adapter allowing me to wire in my ipod
that works with a philips radio. The best my local place could come up
with was £117 for an adapter (I think it was a connects2 one)....

Any idea's / thoughts / opinions on the relative quality of the other
options?

Thanks
In-Car Express
2006-04-04 13:36:26 UTC
Permalink
Post by El Badgerino
Watcha, I've just bought a new car with a philips radio pretty much
well integrated into the dash.
What vehicle?

Jon
--
In-Car Express http://www.incarexpress.co.uk
Car Audio | Security | Multimedia | Navigation
Tel. 01223 301212 Fax. 0870 7484123
El Badgerino
2006-04-04 14:15:05 UTC
Permalink
It's a Renault Scenic (1998)

Thanks
In-Car Express
2006-04-04 14:45:17 UTC
Permalink
Post by El Badgerino
* Using a tape adapter
Poor quality, and can be unreliable with a lot of full-logic decks -
the tape slack cancelling in some units confuses the adaptor with a
tape that's badly wound, which can result in it spitting the tape back
out constantly.
Post by El Badgerino
* Using an itrip or similar
Illegal and, probably more importantly, potentially dangerous. We do
everything we can to deter people from using them.
Post by El Badgerino
* Connecting it to the aerial port using an adapter (you can then
switch between ipod and radio)#
You can do this, but the quality of FM modulators varies drastically,
from acceptable to utterly useless.
Post by El Badgerino
* Connecting it to the stereo's cd changer port using an aux-in adapter
There's no basic aux.input lead available for older D2B units as far
as I'm aware, so you'd have to use the ARNIPOD001 kit - which also
charges and gives basic track control. We do these at £90 - still not
especially cheap, but £27 less than you've been quoted.

Jon
--
In-Car Express http://www.incarexpress.co.uk
Car Audio | Security | Multimedia | Navigation
Tel. 01223 301212 Fax. 0870 7484123
El Badgerino
2006-04-04 15:48:18 UTC
Permalink
Thanks for your reply Jon, this is pretty much well the conclusion I'm
coming to.

The arnipod thing sounds like the best bet based on functionality vs
cost, just a case of whether its worth the extra £££

I have a tape adapter already, so this should do in the short term.
Will definitely come back to your site if the full enchilada is the way
I decide to go.
Christian McArdle
2006-04-11 13:09:07 UTC
Permalink
Post by El Badgerino
The arnipod thing sounds like the best bet based on functionality vs
cost, just a case of whether its worth the extra £££
Your other alternative is to change the whole head unit. It won't cost much
more, but you'll get MP3/CD capability and any other features you fancy.
Obviously, you lose the original equipment look.

Christian.

Loading...